Author Index

A

  • Adelkhani, Ali The Experimental and Numerical Study of the Effects of Holding Force, Die Radius, Pin Radius and Pin Distance on Springback in a Stretch Bending Test [Volume 8, Issue 2, 2021, Pages 35-43]
  • Aghaie-khafri, Mehrdad Hot Workability and Processing Map of High Gd Content Mg-Gd-Zn-Zr-Nd Alloy [Volume 8, Issue 2, 2021, Pages 44-53]
  • Ahmadi, Siroos Strain Distribution in Equal Channel Angular Pressing of AM60 Magnesium Alloy [Volume 8, Issue 1, 2021, Pages 39-49]
  • Akbari, Mostafa A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion [Volume 8, Issue 4, 2021, Pages 46-62]
  • Ali Akbari Sani, Saeed Hot Deformation Behavior and Development of Constitutive Equations on a Novel γ-γ/ Ni-base Superalloy: AD730 [Volume 8, Issue 3, 2021, Pages 4-17]
  • Alimirzaloo, Vali Strain Distribution in Equal Channel Angular Pressing of AM60 Magnesium Alloy [Volume 8, Issue 1, 2021, Pages 39-49]
  • Arab, Seyed Mohammad Effect of Fabrication Method and Porosity Content on Elastic Modulus of a Nano-Particle Dispersed Nickel Base Alloy [Volume 8, Issue 2, 2021, Pages 12-21]
  • Arab, Seyed Mohammad Conjoint Influence of Heat Treatment, Hot Deformation and Cold Working on the Microstructure and Mechanical Response of a Co-Based Superalloy [Volume 8, Issue 3, 2021, Pages 34-45]
  • Ardestani, Mohammad Synthesis and Consolidation of Ag/ZnO Composite Powders via SPS Method [Volume 8, Issue 3, 2021, Pages 26-33]
  • Asadi, Parviz A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion [Volume 8, Issue 4, 2021, Pages 46-62]
  • Asgari, Hamed Textural Evolution of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding Process [Volume 8, Issue 3, 2021, Pages 18-25]
  • Ashrafi, Amir Study on Manufacturing of Internal Gear by Flowforming Process and Investigation of Effective Parameters on Process Force [Volume 8, Issue 1, 2021, Pages 14-25]
  • Ashrafizadeh, Fakhreddin Textural Evolution of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding Process [Volume 8, Issue 3, 2021, Pages 18-25]
  • Askari Khan-abadi, Mojtaba Microstructure Evolution of the Stainless Steel 316L Subjected to Different Routes of Equal Channel Angular Pressing [Volume 8, Issue 2, 2021, Pages 4-11]
  • Ataei, Hossein Numerical Analysis of Plastic Strain Inhomogeneity in Rectangular Vortex Extrusion (RVE) Process [Volume 8, Issue 3, 2021, Pages 46-52]
  • Attar, Mohammadmahdi The Experimental and Numerical Study of the Effects of Holding Force, Die Radius, Pin Radius and Pin Distance on Springback in a Stretch Bending Test [Volume 8, Issue 2, 2021, Pages 35-43]

B

  • Binesh, Behzad Hot Workability and Processing Map of High Gd Content Mg-Gd-Zn-Zr-Nd Alloy [Volume 8, Issue 2, 2021, Pages 44-53]

C

  • Cheraghi, Milad The Experimental and Numerical Study of the Effects of Holding Force, Die Radius, Pin Radius and Pin Distance on Springback in a Stretch Bending Test [Volume 8, Issue 2, 2021, Pages 35-43]

D

  • Dalvand, Hamed The Comprehensive Study on the Classical Constitutive Models in Predicting the Hot Deformation Behavior of Al5083-SiC Metal Matrix Composite [Volume 8, Issue 3, 2021, Pages 53-66]
  • Derakhshan, Seyed Sadegh A Novel Method to Perform the Burst Pressure Test on the Repaired Drinking Water Pipelines [Volume 8, Issue 4, 2021, Pages 4-14]
  • Doniavi, Ali Strain Distribution in Equal Channel Angular Pressing of AM60 Magnesium Alloy [Volume 8, Issue 1, 2021, Pages 39-49]

E

  • Ebrahimi, Gholam Reza Hot Deformation Behavior and Development of Constitutive Equations on a Novel γ-γ/ Ni-base Superalloy: AD730 [Volume 8, Issue 3, 2021, Pages 4-17]
  • Ebrahimi, Ramin Iranian Journal of Materials Forming [Volume 8, Issue 1, 2021, Pages 2-3]
  • Ebrahimi, Ramin Iranian Journal of Materials Forming, Issue 2, April 2021 [Volume 8, Issue 2, 2021, Pages 2-3]
  • Ebrahimi, Ramin Iranian Journal of Materials Forming, Issue 3, July 2021 [Volume 8, Issue 3, 2021, Pages 2-3]
  • Ebrahimi, Ramin Iranian Journal of Materials Forming, Issue 4, October 2021 [Volume 8, Issue 4, 2021, Pages 2-3]
  • Ebrahimi, Zohreh Investigation of Stress Concentration Factors for Functionally Graded Hollow Tubes with Curved Edges under Torsion [Volume 8, Issue 2, 2021, Pages 22-34]
  • Emadoddin, Esmaeil Repetitive Upsetting Extrusion Process of Al 5452 Alloy: Finite Element Analysis and Experimental Investigation [Volume 8, Issue 1, 2021, Pages 65-74]
  • Ezatpour, Hamidreza Hot Deformation Behavior and Development of Constitutive Equations on a Novel γ-γ/ Ni-base Superalloy: AD730 [Volume 8, Issue 3, 2021, Pages 4-17]

F

  • Faraji Shovay, Towhid Repetitive Upsetting Extrusion Process of Al 5452 Alloy: Finite Element Analysis and Experimental Investigation [Volume 8, Issue 1, 2021, Pages 65-74]
  • Farshidi, Mohammad Hassan Microstructure Evolution of the Stainless Steel 316L Subjected to Different Routes of Equal Channel Angular Pressing [Volume 8, Issue 2, 2021, Pages 4-11]

G

  • Ghaemi Khiavi, Sina Repetitive Upsetting Extrusion Process of Al 5452 Alloy: Finite Element Analysis and Experimental Investigation [Volume 8, Issue 1, 2021, Pages 65-74]
  • Ghlandari, Laleh Developing the Cu/Sn Multilayer Composite through Accumulative Roll Bonding (ARB): Investigating the Microstructural and Mechanical Features [Volume 8, Issue 1, 2021, Pages 26-38]

H

  • Hadianfard, Mohammad Jafar Effect of Fabrication Method and Porosity Content on Elastic Modulus of a Nano-Particle Dispersed Nickel Base Alloy [Volume 8, Issue 2, 2021, Pages 12-21]
  • Haghighi, Ahmadreza Conjoint Influence of Heat Treatment, Hot Deformation and Cold Working on the Microstructure and Mechanical Response of a Co-Based Superalloy [Volume 8, Issue 3, 2021, Pages 34-45]
  • Hashemi, S. J. Forming of Archimedean Spiral Bipolar Plates using Hot Gas Forming Process and its Characteristics Evaluation [Volume 8, Issue 1, 2021, Pages 4-13]
  • Heidarzadeh, Akbar Developing α/β Laminar Composite Structure in CuZn Alloy by Heat Treatment and Submerged Friction Stir Processing [Volume 8, Issue 4, 2021, Pages 26-32]

J

  • Jalalizadeh, Younes Conjoint Influence of Heat Treatment, Hot Deformation and Cold Working on the Microstructure and Mechanical Response of a Co-Based Superalloy [Volume 8, Issue 3, 2021, Pages 34-45]
  • Javanmardi, Mohammad Developing the Cu/Sn Multilayer Composite through Accumulative Roll Bonding (ARB): Investigating the Microstructural and Mechanical Features [Volume 8, Issue 1, 2021, Pages 26-38]

K

  • Kavousi Heydari, Reza Effect of Fabrication Method and Porosity Content on Elastic Modulus of a Nano-Particle Dispersed Nickel Base Alloy [Volume 8, Issue 2, 2021, Pages 12-21]
  • Kermanshahi, R. Forming of Archimedean Spiral Bipolar Plates using Hot Gas Forming Process and its Characteristics Evaluation [Volume 8, Issue 1, 2021, Pages 4-13]
  • Khajepour, Mahdi Conjoint Influence of Heat Treatment, Hot Deformation and Cold Working on the Microstructure and Mechanical Response of a Co-Based Superalloy [Volume 8, Issue 3, 2021, Pages 34-45]
  • Khalili, Khalil Study on Manufacturing of Internal Gear by Flowforming Process and Investigation of Effective Parameters on Process Force [Volume 8, Issue 1, 2021, Pages 14-25]
  • Khodadadi, Majid Study on Manufacturing of Internal Gear by Flowforming Process and Investigation of Effective Parameters on Process Force [Volume 8, Issue 1, 2021, Pages 14-25]
  • Kim, Hyoung Seop Numerical Analysis of Plastic Strain Inhomogeneity in Rectangular Vortex Extrusion (RVE) Process [Volume 8, Issue 3, 2021, Pages 46-52]

L

  • Lagzian, Younes Study of Texture Weakening of Commercially Pure Copper Processed by Multiple Compressions in a Channel Die [Volume 8, Issue 4, 2021, Pages 15-25]
  • Lang, Lihui Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach [Volume 8, Issue 4, 2021, Pages 63-75]

M

  • Mahmoudi, Amir-Hossein Vibratory Stress Relief of Welded Austenite Stainless Steel Plates: Numerical and Experimental Approach [Volume 8, Issue 1, 2021, Pages 50-64]
  • Mirzaei, AmirHossein Constitutive Modeling of 7075 Aluminum Alloy under the Hot Compression Condition [Volume 8, Issue 2, 2021, Pages 54-63]
  • Mirzaie, Zahra Hot Deformation Behavior and Development of Constitutive Equations on a Novel γ-γ/ Ni-base Superalloy: AD730 [Volume 8, Issue 3, 2021, Pages 4-17]
  • Moayed, Mohammad Hadi Microstructure Evolution of the Stainless Steel 316L Subjected to Different Routes of Equal Channel Angular Pressing [Volume 8, Issue 2, 2021, Pages 4-11]
  • Mohammadzadeh, Roghayeh Developing α/β Laminar Composite Structure in CuZn Alloy by Heat Treatment and Submerged Friction Stir Processing [Volume 8, Issue 4, 2021, Pages 26-32]
  • Mosadegh, Sahar Hot Workability and Processing Map of High Gd Content Mg-Gd-Zn-Zr-Nd Alloy [Volume 8, Issue 2, 2021, Pages 44-53]
  • Moslemi Naeini, Hasan Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach [Volume 8, Issue 4, 2021, Pages 63-75]
  • M. Semnani, Hamid-Reza Repetitive Upsetting Extrusion Process of Al 5452 Alloy: Finite Element Analysis and Experimental Investigation [Volume 8, Issue 1, 2021, Pages 65-74]

N

  • Negahban, Samaneh Investigation of Stress Concentration Factors for Functionally Graded Hollow Tubes with Curved Edges under Torsion [Volume 8, Issue 2, 2021, Pages 22-34]
  • Niknejad, Abbas A Novel Method to Perform the Burst Pressure Test on the Repaired Drinking Water Pipelines [Volume 8, Issue 4, 2021, Pages 4-14]
  • Nikzad, Bahman Strain Distribution in Equal Channel Angular Pressing of AM60 Magnesium Alloy [Volume 8, Issue 1, 2021, Pages 39-49]

P

  • Pardis, Nima Numerical Analysis of Plastic Strain Inhomogeneity in Rectangular Vortex Extrusion (RVE) Process [Volume 8, Issue 3, 2021, Pages 46-52]
  • Pasereh, Feyzollah A Novel Method to Perform the Burst Pressure Test on the Repaired Drinking Water Pipelines [Volume 8, Issue 4, 2021, Pages 4-14]

R

  • Rabiee, Amir Hossein Parameter Optimization in Resistance Spot Welding of AISI 1060 Steel Using Adaptive Neural Fuzzy Inference System and Sensitivity Analysis [Volume 8, Issue 4, 2021, Pages 33-45]
  • Rabiee, Amir Hossein Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach [Volume 8, Issue 4, 2021, Pages 63-75]
  • Rahimi Asiabaraki, Hossein A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion [Volume 8, Issue 4, 2021, Pages 46-62]
  • Rasaee, Sajad Constitutive Modeling of 7075 Aluminum Alloy under the Hot Compression Condition [Volume 8, Issue 2, 2021, Pages 54-63]
  • Rasaee, Sajad The Comprehensive Study on the Classical Constitutive Models in Predicting the Hot Deformation Behavior of Al5083-SiC Metal Matrix Composite [Volume 8, Issue 3, 2021, Pages 53-66]
  • Rezaee-Bazzaz, Abolfazl Study of Texture Weakening of Commercially Pure Copper Processed by Multiple Compressions in a Channel Die [Volume 8, Issue 4, 2021, Pages 15-25]
  • Rezaei, Mohammad Reza Textural Evolution of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding Process [Volume 8, Issue 3, 2021, Pages 18-25]
  • Roohi, A. H. Forming of Archimedean Spiral Bipolar Plates using Hot Gas Forming Process and its Characteristics Evaluation [Volume 8, Issue 1, 2021, Pages 4-13]

S

  • Safari, Mehdi Parameter Optimization in Resistance Spot Welding of AISI 1060 Steel Using Adaptive Neural Fuzzy Inference System and Sensitivity Analysis [Volume 8, Issue 4, 2021, Pages 33-45]
  • Shahbaz, Mehrdad Numerical Analysis of Plastic Strain Inhomogeneity in Rectangular Vortex Extrusion (RVE) Process [Volume 8, Issue 3, 2021, Pages 46-52]
  • Sherkatghanad, Ehsan Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach [Volume 8, Issue 4, 2021, Pages 63-75]
  • Shooshtari, Alireza Vibratory Stress Relief of Welded Austenite Stainless Steel Plates: Numerical and Experimental Approach [Volume 8, Issue 1, 2021, Pages 50-64]
  • Szpunar, Jerzy Textural Evolution of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding Process [Volume 8, Issue 3, 2021, Pages 18-25]

T

  • Tahmasbi, Vahid Parameter Optimization in Resistance Spot Welding of AISI 1060 Steel Using Adaptive Neural Fuzzy Inference System and Sensitivity Analysis [Volume 8, Issue 4, 2021, Pages 33-45]
  • Tatar, Farzad Vibratory Stress Relief of Welded Austenite Stainless Steel Plates: Numerical and Experimental Approach [Volume 8, Issue 1, 2021, Pages 50-64]
  • Tavallaei, Mohammad Mehdi Conjoint Influence of Heat Treatment, Hot Deformation and Cold Working on the Microstructure and Mechanical Response of a Co-Based Superalloy [Volume 8, Issue 3, 2021, Pages 34-45]
  • Toroghinejad, Mohammad Reza Textural Evolution of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding Process [Volume 8, Issue 3, 2021, Pages 18-25]

Z

  • Zal, Vahid Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach [Volume 8, Issue 4, 2021, Pages 63-75]
  • Zeinolabedin Beygi, Ali Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach [Volume 8, Issue 4, 2021, Pages 63-75]
  • Ziaee, Sima A Novel Method to Perform the Burst Pressure Test on the Repaired Drinking Water Pipelines [Volume 8, Issue 4, 2021, Pages 4-14]